www.sunled.com published date : feb 25,2008 drawing no : sdsa6263 v1 checked : b .l.liu p.1/6 part number: ZMDBGABBG86W 3.0mmx3.0mm full- color surface mount led lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZMDBGABBG86W red ingaalp water clear 110 218 640 green ingan 110 248 520 100 blue ingan 70 158 468 notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3.specifications are subject to change without notice. features low power consumption. 3.0mmx3.0mm smt led, 1.8mm thickness. one red, one green and one blue chips in one package. can produce any color in visible spectrum, including white light. package : 1000pcs / reel. moisture sensitivity level : level 4. rohs compliant. preliminary spec attention observe precautions for handling electrostatic discharge sensitive devices absolute maximum ratings (t a =25c ) md (inga alp) bga (inga n) bbg (ing an) unit reverse voltage v r 5 5 5 v forward current i f 30 30 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 185 100 100 ma power dissipation p t 75 120 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 electrostatic discharge threshold (hbm) - 1000 1000 v md (inga alp) unit forward voltage (typ.) (i f =20ma) v f 1.9 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 640 nm wavelength of dominant emission (typ.) (i f =20ma) d 628 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 27 nm capacitance (typ.) (v f =0v, f=1mhz) c 45 pf operating characteristics (t a =25c ) bga (ing an) 3.2 4.0 10 520 525 35 100 bbg (ing an) 3.2 4.0 10 468 470 21 100
www.sunled.com published date : feb 25,2008 drawing no : sdsa6263 v1 checked : b .l.liu p.2/6 part number: ZMDBGABBG86W 3.0mmx3.0mm full- color surface mount led lamp md
www.sunled.com published date : feb 25,2008 drawing no : sdsa6263 v1 checked : b .l.liu p.3/6 part number: ZMDBGABBG86W 3.0mmx3.0mm full- color surface mount led lamp bga
www.sunled.com published date : feb 25,2008 drawing no : sdsa6263 v1 checked : b .l.liu p.4/6 part number: ZMDBGABBG86W 3.0mmx3.0mm full- color surface mount led lamp bbg
www.sunled.com published date : feb 25,2008 drawing no : sdsa6263 v1 checked : b .l.liu p.5/6 part number: ZMDBGABBG86W 3.0mmx3.0mm full- color surface mount led lamp recommended soldering pattern (units : mm; tolerance: 0.1) the device has a single mounting surface. the device must be mounted according to the specifications. tape specification (units : mm) remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com published date : feb 25,2008 drawing no : sdsa6263 v1 checked : b .l.liu p.6/6 part number: ZMDBGABBG86W 3.0mmx3.0mm full- color surface mount led lamp packing & label specifications ZMDBGABBG86W
|
